
HDMI Extension on UTP
9.0 Specifications
Video
DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications
including 12 bit color depth, 3D video and 4K support)
Connectors Locking HDMI input, RJ45 HDBaseT output
Resolutions DVI signal VGA (640x480) thru WUXGA (1920x1200)
HDTV signal 480i through 1080p
Digital Cinema 4K (4096x2160)
All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and
DTS-HD Master Audio (32-192kHz sample rate)
Pass-Thru DDC for reading EDID directly from remotely connected LCD
and HDCP handshake
Pass-Thru DDC for Consumer Electronics Control compatible devices
Bidirectional (full-duplex) any baud rate up to 115,200
Extended in both directions. Carrier modulation range from 30 KHz to 60
KHz
Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as
Class 2 PoE device
General
100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated
Actual DC current (powering both –PSE and –PD sides) 1.8A max
3.0 watts (10 BTU) maximum
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, non-condensing
2.6" H x 1.3" W x 1.8" D (66mm H x 33mm W x 46mm D)
dimensions exclude mounting tabs on front for Decora® plate
Product: 5 oz (0.31 lb or 142 g)
Shipping: 8.5 oz (0.53 lb or 241 g) includes: mud-ring & faceplate
ISTA 1A in carton (International Safe Transit Association)
MTBF 90,000 hours (Calculated Estimate)
Specifications are subject to change without notice
Komentáře k této Příručce